Removal Procedure
- Remove the oil pan. Refer to Oil Pan Replacement (L5Q) .
Remove the oil pump drive chain cover bolt (1) and remove the oil pump drive chain cover (2).
Release the tension using the suitable tool.
Remove the 3 crankshaft oil deflector bolts (1) and 2 crankshaft oil deflector bolts (2).
- Remove the crankshaft oil deflector (3).
-
NOTE:
Oil pump is removed/installed as an assembly with the oil pump sprocket.
Remove the oil pump bolts (1, 4) and remove the oil pump (2) with 2 oil pump gasket (3).