LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark ACTIV, Automatic CVT Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 1.0L (L5Q) Or 1.4L (LV7) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Oil Pump Drive Chain Tensioner Replacement >> Installation Procedure

Installation Procedure

  1. GM4037098Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Ensure the tensioner spring is retained in the correct position prior to installation.

    CAUTION:

    Refer to Fastener Caution .

    Install the oil pump drive chain tensioner (2) and tighten to 10 N.m (89 lb in).

  2. GM4037085Courtesy of GENERAL MOTORS COMPANY

    Remove the oil pump drive chain tensioner pin (1).

  3. Install the camshaft timing chain. Refer to Camshaft Timing Chain Replacement .
scientia non olet · About LEMON Manuals