LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark ACTIV, Automatic CVT Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 1.0L (L5Q) Or 1.4L (LV7) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Hydraulic Valve Lash Adjuster Replacement >> Removal Procedure

Removal Procedure

  1. Remove the hydraulic valve lash adjuster arm. Refer to Hydraulic Valve Lash Adjuster Arm Replacement .
  2. GM4036753Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Many internal engine components will develop specific wear patterns on their friction surfaces.

    Components MUST be separated, marked, or organized in a way to ensure installation to their original location and position. Take precautions in order to prevent interchanging of parts.

  3. Tag or mark each part immediately when removed. Indicate location, direction, or orientation when necessary.
  4. Remove the 12 hydraulic valve lash adjusters (1).
scientia non olet · About LEMON Manuals