LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark ACTIV, Automatic CVT Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 1.0L (L5Q) Or 1.4L (LV7) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Hydraulic Valve Lash Adjuster Arm Replacement >> Installation Procedure

Installation Procedure

  1. GM4036727Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Used lash adjuster arms must be returned to the original position on the camshaft. If the camshaft is being replaced, the lash adjuster arms actuated by the camshaft must also be replaced.

    Apply lubricant to the valve tips. Refer to Adhesives, Fluids, Lubricants, and Sealers (Europe L5Q)Adhesives, Fluids, Lubricants, and Sealers (North America L5Q) .

  2. Position the 12 hydraulic lash adjuster arms (1) on the tip of the valve stems and on the lash adjusters.
  3. Apply lubricant to the 12 hydraulic lash adjuster arms (1). Refer to Adhesives, Fluids, Lubricants, and Sealers (Europe L5Q)Adhesives, Fluids, Lubricants, and Sealers (North America L5Q) .
  4. Install the exhaust camshaft. Refer to Exhaust Camshaft Replacement .
  5. Install the intake camshaft. Refer to Intake Camshaft Replacement .
scientia non olet · About LEMON Manuals