LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark ACTIV, Automatic CVT Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 1.0L (L5Q) Or 1.4L (LV7) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Exhaust Camshaft Replacement (LV7) >> Installation Procedure

Installation Procedure

  1. Fig 1: Exploded View Of Exhaust Camshaft, Exhaust Camshaft Bearing Caps And Bolts
    GM4230643Courtesy of GENERAL MOTORS COMPANY

    Coat the exhaust camshaft with lubricant. Refer to Adhesives, Fluids, Lubricants, and Sealers (Europe LV7)Adhesives, Fluids, Lubricants, and Sealers (North America LV7) .

  2. Install the exhaust camshaft in the cylinder head.
  3. Ensure that the camshaft notch at the front of the camshaft is in the 12 O'clock position before installing the camshaft caps.
    4. NOTE:

    Observe the markings on the bearing caps. Each bearing cap is marked in order to identify its location. Ensure the caps are installed in the original location and position.

  4. Lubricate the 5 camshaft bearing caps (2, 3) and the 12 camshaft bearing cap bolts (3). Refer to Adhesives, Fluids, Lubricants, and Sealers (Europe LV7)Adhesives, Fluids, Lubricants, and Sealers (North America LV7) .
  5. Install the camshaft bearing cap (3).
  6. Install the camshaft bearing front cap (2).
  7. Loosely install the 12 camshaft bearing cap bolts (1) by hand.
scientia non olet · About LEMON Manuals