LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark ACTIV, Automatic CVT Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 1.0L (L5Q) Or 1.4L (LV7) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Engine Mount Replacement >> Installation Procedure

Installation Procedure

  1. GM4043900Courtesy of GENERAL MOTORS COMPANY

    Install the engine mount (2) to the vehicle.

    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the engine mount frame side bracket nuts (1) and tighten to 58 N.m (43 lb ft).
  3. GM4043898Courtesy of GENERAL MOTORS COMPANY

    Install the engine mount frame side bracket bolt (1) and tighten to 58 N.m (43 lb ft).

  4. GM4043897Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Torque-to-Yield Fastener Caution .

    Install the NEW engine mount bolts (1) and tighten to 58 N.m (43 lb ft) + 60 to 75 degrees.

  5. GM4043896Courtesy of GENERAL MOTORS COMPANY

    Place the air conditioning evaporator hose (2) to the right position and install the air conditioning evaporator tube bracket nut (1). Refer to Air Conditioning Evaporator Hose Assembly Replacement (L5Q)Air Conditioning Evaporator Hose Assembly Replacement (LV7) .

  6. Remove the engine support fixture. Refer to Engine Support Fixture (LV7) Engine Support Fixture .
  7. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
scientia non olet · About LEMON Manuals