LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark ACTIV, Automatic CVT Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 1.0L (L5Q) Or 1.4L (LV7) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Engine Lift Rear Bracket Replacement >> Installation Procedure

Installation Procedure

  1. GM4036632Courtesy of GENERAL MOTORS COMPANY

    Install the engine lift rear bracket (2).

  2. Install the engine lift rear bracket bolts (1) and tighten to 25 N.m (18 lb ft).
  3. GM4036631Courtesy of GENERAL MOTORS COMPANY

    Install the engine wiring harness bracket (2) and bolt (1).

  4. Tighten to 9 N.m (80 lb in).
  5. GM4036630Courtesy of GENERAL MOTORS COMPANY

    Install the wiring harness retainer (1, 2, 3) to engine wiring harness bracket.

  6. Close the hood.
scientia non olet · About LEMON Manuals