X910 Body Harness to Rear Compartment Tail Lamp - Left Harness (-UGE)
Connector Part Information
|
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool | Service Terminal | Tray Name | Core Crimp | Insulation Crimp |
|---|---|---|---|---|---|---|---|
| I | Not Required | J-35616-14 (GN) | No Tool Required | Not Required | Not Required | Not Required | Not Required |
| II | Not Required | Not Available | No Tool Required | Not Required | Not Required | Not Required | Not Required |
| Pin | Size | Color | Circuit | Terminal Type ID | Option | Function | Pin | Size | Color | Circuit | Terminal Type ID | Option |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 0.35 | BK | 2550 | I | - | Ground | 1 | 0.35 | BK | 2550 | II | - |
| 2 | 0.5 | VT/GY | 709 | I | - | Left Park Lamp Control | 2 | - | - | - | - | - |
| 3 | 0.5 0.35 |
GN/WH GN/WH |
24 24 |
I I |
-DD8/-UGE DD8-UGE |
Backup Lamp Control Backup Lamp Control |
3 | 0.75 | GN/WH | 24 | II | - |
| 4 | - | - | - | - | - | Not Occupied | 4 | - | - | - | - | - |