LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Malibu LS >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Diagnostic Information And Procedures >> DTC P257D-P257F (with HP4) >> Circuit/System Description

Circuit/System Description

The K114B Hybrid/EV Powertrain Control Module 2 applies B+ to the hood ajar signal 2 circuit and monitors the voltage to determine the position of the hood. The hood ajar switch contains a multiplexed resistor. This resistor will vary the voltage seen by the K114B Hybrid/EV Powertrain Control Module 2 by pulling down the applied voltage based on the position of the switch.

scientia non olet · About LEMON Manuals