Conditions for Setting the DTC
WARNING: This page is about a different variant/trim than selected.
P0112
NOTE:
The scan tool display range is between -40 and +150°C (-40 and +302°F).
The ECM detects that the sensor signal is warmer than 150°C (302°F) for at least 5 s.
P0113
NOTE:
The scan tool display range is between -40 and +150°C (-40 and +302°F).
The ECM detects that the sensor signal is colder than -60°C (-76°F) for at least 5 s.
P0114
The ECM monitors the sensor signal every 0.1 s, to determine if the signal has changed more than 125°C (257°F) during a 4 s time peroid.