Typical Scan Tool Data
WARNING: This page is about a different variant/trim than selected.
Intake Air Humidity
| Circuit | Short to Ground | Open or High Resistance | Short to Voltage |
|---|---|---|---|
| Operating Conditions:
Engine Running Parameter Normal Range: Varies with ambient humidity and temperature; and engine bay conditions |
|||
| Ignition Voltage | 0 % | 0 % | - |
| Signal | 100 % | 0 % | 0 %* |
| Ground | - | 0 % | - |
| *Internal ECM or sensor damage may occur if the circuit is shorted to B+ | |||
IAT Sensor 2
| Circuit | Short to Ground | Open or High Resistance | Short to Voltage |
|---|---|---|---|
| Operating Conditions:
Engine Running Parameter Normal Range: Varies with ambient temperature |
|||
| Ignition Voltage | -40°C (-40°F) 10 Hz |
-40°C (-40°F) 10 Hz |
- |
| Signal | -40°C (-40°F) 10 Hz |
-40°C (-40°F) 10 Hz |
-40°C (-40°F)* 10 Hz |
| Ground | - | -40°C (-40°F) 10 Hz |
- |
| *Internal ECM or sensor damage may occur if the circuit is shorted to B+ | |||