LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Impala Premier, Gas >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Engine Controls And Fuel - 2.5L (LCV) - Diagnostic Information And Procedures (P0010-P0336)) >> Diagnostic Information and Procedures >> DTC P0097, P0098, or P0099 >> Conditions for Setting the DTCs

Conditions for Setting the DTCs

WARNING: This page is about a different variant/trim than selected.

P0097 

NOTE:

The scan tool display range is between -40 and +150°C (-40 and +302°F).

The ECM detects that the sensor signal is less than 13 Hz, colder than -60°C (-76°F), for greater than 5 s.

P0098 

The ECM detects that the sensor signal is greater than 390 Hz, warmer than 150°C (302°F), for greater than 5 s.

P0099 

The ECM monitors the sensor signal every 0.1 s, to determine if the signal has changed more than 125°C (257°F) during a 4 s time period.

scientia non olet · About LEMON Manuals