Conditions for Running the DTC

WARNING: This page is about a different variant/trim than selected.

P2122, P2123, P2127, P2128

DTC P0697 and P06A3 are not set.
The ignition is ON or the engine is running.
The run/crank or powertrain relay voltage is greater than 6.0 V and reduced power is not active.
DTC P2122, P2123, P2127, P2128 run continuously when the above conditions are met.

P2138

DTC P0697, P06A3, P2122, P2123, P2127, and P2128 are not set.
The ignition is ON or the engine is running.
The run/crank or powertrain relay voltage is greater than 6.0 V and reduced power is not active.
DTC P2138 runs continuously when the above conditions are met.