Conditions for Setting the DTC

P0340 or P0365 Condition 1

• The ECM does not detect a camshaft position sensor pulse for greater than 5.5 s.

  OR

• The ECM does not detect a camshaft position sensor pulse for greater than 4.0 s since the time the starter has been engaged.

Condition 2 

The ECM detects less than 4 camshaft position sensor pulse for greater than 3.0 s.

Condition 3 

The ECM does not detect a camshaft position sensor pulse during the first 2 engine revolutions.

Condition 4 

The ECM does not detect a camshaft position sensor pulse during 200 engine revolutions.

P0341 or P0366 Condition 1

• The ECM detects less than 4 camshaft position sensor pulses during 2 engine revolutions.

  OR

• The ECM detects greater than 10 camshaft position sensor pulses during 2 engine revolutions.

Condition 2 

The ECM detects less than 398 or greater than 402 camshaft position sensor pulses during 200 engine revolutions.