Manifold Absolute Pressure Sensor Replacement

WARNING: This page is about a different variant/trim than selected.

Callout	Component Name
Preliminary Procedure Air Cleaner Resonator and Outlet Duct Replacement
1	Manifold Absolute Pressure Sensor Retaining Fastener CAUTION: Refer to Fastener Caution . Tighten 10 N.m (89 lb in)
2	Manifold Absolute Pressure Sensor NOTE: Install a NEW O-ring seal. Procedure Disconnect the engine wiring harness electrical connector from the manifold absolute pressure sensor. Remove the manifold absolute pressure sensor from the intake manifold.

Callout

Component Name

Preliminary Procedure

Manifold Absolute Pressure Sensor Retaining Fastener

CAUTION:

Tighten
10 N.m (89 lb in)

Manifold Absolute Pressure Sensor

NOTE:

Install a NEW O-ring seal.

Procedure

Disconnect the engine wiring harness electrical connector from the manifold absolute pressure sensor.
Remove the manifold absolute pressure sensor from the intake manifold.