Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- WARNING:
Refer to Diesel/Gasoline Vapors Warning .
Remove the fuel tank. Refer to Fuel Tank Replacement .
- Disconnect the fuel pump electrical connector (1) and the quick connects (2). Refer to Plastic Collar Quick Connect Fitting Service .
Use the CH 45722 wrench by turning counter clockwise and remove the lock ring (1).
Disconnect the fuel pump vent hose. Refer to Plastic Collar Quick Connect Fitting Service .
Remove the fuel tank module (1) and the O-ring (2).