LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Impala Premier, Gas >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Controls And Fuel - 2.5L (LCV) - Repair Instructions) >> Repair Instructions >> Fuel Tank Fuel Pump Module Replacement (NQU, NT7) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. GM2817603

    Install a NEW seal (2) and the fuel tank module (1).

  2. GM2817600

    Connect the fuel pump vent hose. Refer to Plastic Collar Quick Connect Fitting Service .

  3. GM2817604

    Use the CH 45722  wrench by turning clockwise and install the lock ring (1).

  4. GM2817602

    Connect the fuel pump electrical connector (1) and the quick connects (2). Refer to Plastic Collar Quick Connect Fitting Service .

  5. Install the fuel tank. Refer to Fuel Tank Replacement .