Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
- Remove the catalytic converter. Refer to Catalytic Converter Replacement .
- Using a suitable jack stand, support the rear of the powertrain.
Remove the transmission mount to bracket through bolt (1).
Remove the transaxle brace bolt (1), then loosen bolt (2) until it no longer engages the transaxle.
- Remove the transaxle brace (3) with bolt (2) still retained in the brace.
Remove the three transmission mount to transmission bolts (2).
Remove the rear mount to frame fasteners (1, 2), then remove the mount and bracket from the vehicle.