Output Speed Sensor Replacement

WARNING: This page is about a different variant/trim than selected.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the control solenoid valve and transmission control module assembly. Refer to Control Solenoid Valve and Transmission Control Module Assembly Replacement . Perform the service fast learn adapt procedure.
1	Output Speed Sensor Bolt M6 x 18 CAUTION: Refer to Fastener Caution . Tighten 12 N.m (106 lb in)
2	Output Speed Sensor

Callout

Component Name

Preliminary Procedures

Remove the control solenoid valve and transmission control module assembly. Refer to Control Solenoid Valve and Transmission Control Module Assembly Replacement .
Perform the service fast learn adapt procedure.

Output Speed Sensor Bolt M6 x 18

CAUTION:

Tighten
12 N.m (106 lb in)

Output Speed Sensor