Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P0815, P0816 Condition 1
- DTC P0815, P0816, P0826, P1761, P182E, P1876, P1877, P1915 = Not set
- Engine Speed = 400 to 7500 RPM - For greater than 5 s
- Ignition Voltage = 9 to 32 V
- Time since the last transmission shift = Greater than 1 s
- Transmission = Park/NeutralorReverse
Frequency the DTC runs = Continuously - After the running conditions are met
Condition 2
- DTC P0815, P0816, P0826, P1761, P182E, P1876, P1877, P1915 = Not set
- Engine Speed = 400 to 7, 500 RPM - For greater than 5 s
- Ignition Voltage = 9 to 32 V
- Time since the last transmission shift = Greater than 1 s
- Transmission = Forward Gear
Frequency the DTC runs = Continuously - After the running conditions are met
P0826
- DTC P1761 = Not set
- Engine Speed = 400 to 7, 500 RPM - For greater than 5 s
- Ignition Voltage = 9 to 32 V
Frequency the DTC runs = Continuously After the running conditions are met