Actions Taken When the DTC Sets
WARNING: This page is about a different variant/trim than selected.
DTCs listed in the DTC Descriptor Category = Type A DTC Additional actions taken:
- Grade braking = Disabled
- Line Pressure Command = Maximum
- Manual Shift Control = Disabled
- Mode Switch = Disabled
- Neutral Idle Mode = Disabled
- Powertrain braking = Disabled
- Tap Up or Tap Down = Disabled
- { P0716 }TCC Control = Disabled
- { P0716, P0717 } Torque Management = Active
- Transmission Adaptive Pressure Control = Freeze current adapt values
- Transmission gear allowed = Reverse & 4th Gear