Conditions for Setting the DTC

WARNING: This page is about a different variant/trim than selected.

P06AC

TCM detects a 20 - 50°C (36 - 90°F), or greater difference between the transmission fluid temperature and TCM power up temperature, which depends on the average of transmission fluid temperature, TCM substrate temperature, and TCM power up temperature.
TCM detects an 8 - 10°C (14 - 18°F), or greater difference between the TCM substrate temperature and TCM power up temperature, which depends on the average of the transmission fluid temperature, TCM substrate temperature, and TCM power up temperature.
Above conditions have to be met for 5 min within a 6 min period.

P06AD

TCM power up temperature is -254°C (-425°F) or less for 1 min.

P06AE

TCM power up temperature is 254°C (489°F) or greater for 1 min.