Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P0667
- DTC P0101 - P0103, P0106 - P0108, P0171, P0172, P0174, P0175, P0201 - P0208, P0300 - P0308, P0401, P042E, P0658, P0668, P0669, P06AD, P06AE, P0712, P0713, P0716, P0717, P0722, P0723, P0962, P0963, P0966, P0967, P0970, P0971, P215C, P2720, P2721, P2729, P2730 = Not set
- Accelerator pedal position signal = Valid
- Engine Torque Signal = Valid
- Engine Speed = 400 to 7, 500 RPM
- Ignition Voltage = 9 to 32 V
Frequency the DTC runs = Continuously - After the running conditions are met - For greater than 5 s
P0668, P0669
- { P0669 } DTC P0716, P0717, P0722, P0723 = Not set
- Engine Speed = 400 to 7, 500 RPM
- Ignition Voltage = 9 to 32 V
Frequency the DTC runs = Continuously - After the running conditions are met - For greater than 5 s