Rear Side Door Weatherstrip Replacement - Body Side

Callout	Component Name
Preliminary Procedure Remove the center pillar lower trim panel. Refer to Center Pillar Lower Trim Panel Replacement .
1	Rear Side Door Weatherstrip to Body Side Procedure Start at the front upper corner of the door opening and pull the weatherstrip away from the door opening flange. Position the weatherstrip in the upper corner of the center pillar. Working downward along the front edge, install the weatherstrip on the door opening flange ensuring that the carrier is fully seated in the corners. Ensure that the weatherstrip is seated on the entire door opening flange. NOTE: Inspect the door to ensure a proper seal after the weatherstrip has been replaced.

Callout

Component Name

Preliminary Procedure
Remove the center pillar lower trim panel. Refer to Center Pillar Lower Trim Panel Replacement .

Rear Side Door Weatherstrip to Body Side

Procedure

Start at the front upper corner of the door opening and pull the weatherstrip away from the door opening flange.
Position the weatherstrip in the upper corner of the center pillar.
Working downward along the front edge, install the weatherstrip on the door opening flange ensuring that the carrier is fully seated in the corners.
Ensure that the weatherstrip is seated on the entire door opening flange.

NOTE:

Inspect the door to ensure a proper seal after the weatherstrip has been replaced.