Removal Procedure

Up/Down or In/Out Adjustment

1. Remove the front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement .
2. Remove the front fender insulator as needed.
3. Open the door.
CAUTION:

Refer to Paint Damage Caution .

NOTE:

The door side upper and lower hinge bolts must remain tight enough to retain door adjusted position.

4. Apply masking tape to the fender and the door edges.

   Loosen the door side hinge bolts.

   Do not remove the bolts from the door.

5. Adjust the door up or down by repositioning the door as needed.
6. Adjust the door in or out by repositioning the door as needed.

Fore/Aft Adjustment

1. Remove the front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement .
2. Remove the front fender insulator as needed.
CAUTION:

Refer to Paint Damage Caution .

NOTE:

The door side upper and lower hinge bolts must remain tight enough to retain door adjusted position.

3. Apply masking tape to the fender and door edges.

   Loosen the bodyside hinge bolts.

   Do not remove the bolts from the door.

4. Adjust the door fore and aft by repositioning the door as needed.