LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 6T40 (MNH MNK) Or 6T45 (MHG) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Range Selector Lever Cable Replacement >> Removal Procedure

Removal Procedure

  1. Set the park brake and chock the wheels.
    2. Fig 1: Transmission Range Selector Lever Cable Components
    GM3825625Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect the range selector lever cable terminal (4) from the transmission manual shift lever (5).
  3. Push the locking tab (2) forward in order to release the range selector lever cable (1) from the cable bracket (3).
  4. Remove the range selector lever cable from the transmission.
  5. Remove the front floor lower console. Front Floor Lower Console Replacement (Equinox)
    6. Fig 2: Range Selector Lever Cable Components
    GM3825666Courtesy of GENERAL MOTORS COMPANY
  6. Disconnect the range selector lever cable terminal (1) from the transmission control shift lever pin (2).
  7. Push the locking tab (3) rearward in order to release the range selector lever cable (1) from the transmission control assembly (4).
  8. Reposition the front left carpet to access the shift cable grommet, if necessary.
    9. Fig 3: Range Selector Lever Cable Grommet Fasteners
    GM3825645Courtesy of GENERAL MOTORS COMPANY
  9. Remove the range selector lever cable grommet fasteners (2).
  10. Remove the range selector lever cable (1) from the vehicle.
scientia non olet · About LEMON Manuals