LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 6T40 (MNH MNK) Or 6T45 (MHG) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Range Selector Lever Cable Bracket Replacement >> Removal Procedure

Removal Procedure

  1. Set the park brake and chock the wheels.
  2. Disconnect the range selector lever cable from the range selector lever cable bracket. Range Selector Lever Cable Replacement 
    3. Fig 1: Transmission Range Selector Cable Bracket, Bolt And Stud
    GM4769444Courtesy of GENERAL MOTORS COMPANY
  3. Remove the transmission range selector cable bracket bolt (1).
  4. Remove the transmission range selector cable bracket stud (2).
  5. Remove the transmission range selector cable bracket (3).
scientia non olet · About LEMON Manuals