LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 6T40 (MNH MNK) Or 6T45 (MHG) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Range Selector Lever Cable Bracket Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Transmission Range Selector Cable Bracket, Bolt And Stud
    GM4769444Courtesy of GENERAL MOTORS COMPANY
  1. Install the transmission range selector cable bracket (3).
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the transmission range selector lever cable bracket stud (2) and tighten to 22 N.m (16 lb ft).
  3. Install the transmission range selector lever cable bracket bolt (1) and tighten to 22 N.m (16 lb ft).
  4. Connect the range selector lever cable to the range selector lever cable bracket. Range Selector Lever Cable Replacement 
  5. Check the range selector cable adjustment. Range Selector Lever Cable Adjustment 
scientia non olet · About LEMON Manuals