LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 6T40 (MNH MNK) Or 6T45 (MHG) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Manual Shift Shaft And Seal Replacement >> Removal Procedure

Removal Procedure

  1. Remove the battery tray. Refer to Battery Tray Replacement .
  2. Remove the manual shaft and position switch assembly. Refer to Manual Shift Detent Lever with Shaft Position Switch Assembly Replacement .
    3. Fig 1: Cooler Line Seal Remover
    GM2079285Courtesy of GENERAL MOTORS COMPANY
  3. Remove the manual shaft seal (1) using DT-45201  remover.
scientia non olet · About LEMON Manuals