Control Valve Body Assembly Disassemble (Gen 3)

Fig 1: View Of Control Valve Body Assembly (Gen 3)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Control Solenoid Valve Support
2	Control Valve Body Bolt M5 x 40.5 (Qty: 1)
3	Valve Channel Plate NOTE: Inspect the channel plate bolt pass through holes for damage or brinelling. Any damage will cause incorrect pressure switch operation. Replace as necessary.
4	Valve Body Ball Check Valves - with S/S (Qty: 5), without S/S (Qty: 6)