| Input Carrier Assembly (570) |
Inspect for worn or stripped Output Internal Gear Splines. |
| Low-Reverse and 1 - 2 - 3 - 4 Clutch Housing (551) |
- Inspect for damaged or fatigued 1 - 2 - 3 - 4 Clutch Wave Plate (557) and Low and Reverse Clutch Wave Plate (547). Refer to Clutch Plate Diagnosis .
- Inspect for stripped or sheared splines on 1 - 2 - 3 - 4 Clutch Plate (546). Refer to Clutch Plate Diagnosis .
- Inspect for improperly positioned or plugged Low Reverse Piston (550) air bleed.
- Inspect for correct fluid level.
|
| Low and Reverse Clutch Assembly (OWC) (543) |
Inspect for stripped or sheared internal and external splines on Low and Reverse Clutch Assembly (543). |