Conditions for Running the DTC

P06AC

• DTC P0101, P0102, P0103, P0106, P0107, P0108, P0171, P0172, P0174, P0175, P0201, P0202, P0203, P0204, P0205, P0206, P0207, P0208, P0300, P0301, P0302, P0303, P0304, P0305, P0306, P0307, P0308, P0401, P042E, P0658, P0668, P0669, P06AC, P06AD, P06AE, P0712, P0713, P0716, P0717, P0722, P0723, P0962, P0963, P0966, P0967, P0970, P0971, P215C, P2720, P2721, P2729, or P2730 is not set.
• Throttle position signal is valid.
• Engine speed is 400 - 7, 500 RPM for 5 s.
• Ignition voltage is 9 - 32 V.
• Engine torque signal is valid.
• DTC runs continuously when the above conditions are met.

P06AD

• DTC P06AD, P0716, P0717, P0722, or P0723 is not set.
• Engine speed is 400 - 7, 500 RPM for 5 s.
• Ignition voltage is 9 - 32 V.
• DTC runs continuously when the above conditions are met.

P06AE

• DTC P06AE is not set.
• Engine speed is 400 - 7, 500 RPM for 5 s.
• Ignition voltage is 9 - 32 V.
• DTC runs continuously when the above conditions are met.