LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Controls And Fuel - 2.0L (LTG) - Repair Instructions) >> Repair Instructions >> Charge Air Cooler Outlet Air Tube Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove Front Bumper Fascia - Front Bumper Fascia Replacement (Equinox)Front Bumper Fascia Replacement (Terrain)
  2. Remove Intake Air Pressure and Temperature Sensor - Intake Air Pressure and Temperature Sensor Replacement 
  3. Remove Engine Coolant Air Bleed Hose @ Charge Air Cooler Outlet Air Tube - Engine Coolant Air Bleed Hose Replacement (Radiator Surge Tank to Radiator to Engine Coolant Air Bleed Pipe LTG)
    4. Fig 1: Charge Air Cooler Outlet Air Tube Bolt
    GM4897950Courtesy of GENERAL MOTORS COMPANY
  4. Remove Charge Air Cooler Outlet Air Tube Bolt (1)
    5. Fig 2: Retainer Spring And Charge Air Cooler Outlet Air Tube
    GM4645309Courtesy of GENERAL MOTORS COMPANY
  5. Release Retainer Spring (1).
  6. Remove Charge Air Cooler Outlet Air Tube (2)
    7. Fig 3: Retainer Spring And Charge Air Cooler Outlet Air Tube
    GM4645311Courtesy of GENERAL MOTORS COMPANY
  7. Release Retainer Spring (1)
  8. Remove Charge Air Cooler Outlet Air Tube (2)
scientia non olet · About LEMON Manuals