LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Controls And Fuel - 2.0L (LTG) - Repair Instructions) >> Repair Instructions >> Charge Air Cooler Inlet Air Tube Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove Front Bumper Fascia - Front Bumper Fascia Replacement (Equinox)Front Bumper Fascia Replacement (Terrain)
  2. Fig 1: Charge Air Cooler Inlet Air Tube
    GM4645302Courtesy of GENERAL MOTORS COMPANY
  3. Remove Charge Air Cooler Inlet Air Tube Bolt (1) - [2x]
  4. Remove Charge Air Cooler Inlet Air Tube (2).
  5. Fig 2: Retainer Spring And Charge Air Cooler Inlet Air Tube
    GM4645306Courtesy of GENERAL MOTORS COMPANY
  6. Release Retainer Spring (1)
  7. Remove Charge Air Cooler Inlet Air Tube (2)