LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Controls And Fuel - 2.0L (LTG) - Diagnostic Information And Procedures (P0010 - P0333)) >> Diagnostic Information And Procedures >> DTC P0112, P0113 Or P0114: Intake Air Temperature (IAT) Sensor 1 Circuit >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different variant/trim than selected.
NOTE:

The scan tool display range is between -40 and +150°C (-40 and +302°F).

P0112 

The ECM detects that the IAT sensor signal is warmer than 149°C (300°F) for at least 5 s.

P0113 

The ECM detects that the IAT sensor signal is colder than -60°C (-76°F) for at least 5 s.

P0114 

Where this DTC is used, the ECM detects that the IAT sensor signal is intermittent or has abruptly changed for at least 5 s.

scientia non olet · About LEMON Manuals