LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Controls And Fuel - 2.0L (LTG) - Diagnostic Information And Procedures (P0010 - P0333)) >> Diagnostic Information And Procedures >> DTC P0097, P0098 Or P0099: Intake Air Temperature (IAT) Sensor 2 Circuit >> Conditions for Setting the DTCs

Conditions for Setting the DTCs

WARNING: This page is about a different variant/trim than selected.

P0097 

NOTE:

The scan tool display range is between -40 and +150°C (-40 and +302°F).

The ECM detects that the IAT sensor 2 signal is less than 13 Hz, colder than -60°C (-76°F), for greater than 5 s.

P0098 

The ECM detects that the IAT sensor 2 signal is greater than 390 Hz, warmer than 150°C (302°F), for greater than 5 s.

P0099 

The ECM detects that the IAT sensor 2 signal is intermittent or has abruptly changed for longer than 5 s.

scientia non olet · About LEMON Manuals