Conditions for Setting the DTCs
WARNING: This page is about a different variant/trim than selected.
P0096
- The ECM determines the absolute difference between IAT sensor 1 start-up temperature and the IAT sensor 2 start-up temperature is greater than 30°C (54°F).
AND
- The absolute difference between ECT start-up temperature and the IAT sensor 2 start-up temperature is greater or equal to the absolute difference between ECT start-up temperature and the IAT sensor 1 start-up temperature.
- The DTCs run once per ignition cycle when the conditions above are met.
P0111
- The ECM determines the absolute difference between IAT sensor 1 start-up temperature and the IAT sensor 2 start-up temperature is greater than 30°C (54°F).
AND
- The absolute difference between ECT start-up temperature and the IAT sensor 1 start-up temperature is greater or equal to the absolute difference between ECT start-up temperature and the IAT 2 start-up temperature.
- The DTCs run once per ignition cycle when the conditions above are met.