LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Controls And Fuel - 2.0L (LTG) - Diagnostic Information And Procedures (P0010 - P0333)) >> Diagnostic Information And Procedures >> DTC P0033, P0034, Or P0035: Turbocharger Bypass Solenoid Valve Control Circuit >> Component Testing >> Static Test

Static Test

WARNING: This page is about a different variant/trim than selected.
  1. Ignition Off, disconnect the harness connector at the Q40 Turbocharger Bypass Solenoid Valve.
  2. Test for 10 - 14 Ω between the control terminal 2 and the Ignition terminal 1 of the Q40 Turbocharger Bypass Solenoid Valve.
    • If not between 10 - 14 Ω 

      Replace the Q40 Turbocharger Bypass Solenoid Valve.

    • Go to next step: If between 10 - 14 Ω 
  3. All OK
scientia non olet · About LEMON Manuals