LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 2.0L (LTG)) >> Repair Instructions - On Vehicle >> Crankshaft Rear Oil Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the automatic transmission flex plate. Refer to Automatic Transmission Flex Plate Replacement .
    2. Fig 1: Crankshaft Rear Oil Seal
    GM2812543Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Do not damage the outside diameter of the crankshaft or chamber with any tool.

  2. Use a suitable tool to remove the crankshaft rear oil seal (1).
scientia non olet · About LEMON Manuals