LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 2.0L (LTG)) >> Repair Instructions - On Vehicle >> Camshaft Timing Chain And Tensioner Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the engine front cover. Refer to Engine Front Cover Replacement .
    2. Fig 1: Upper Timing Chain Guide Bolts
    GM2742534Courtesy of GENERAL MOTORS COMPANY
  2. Remove the upper timing chain guide bolts (2, 3).
  3. Remove the upper timing chain guide (1).
    4. Fig 2: Timing Chain Tensioner Bolts And Timing Chain Tensioner
    GM2812837Courtesy of GENERAL MOTORS COMPANY
  4. Remove Timing Chain Tensioner Bolt (1) [2x]
  5. Remove Timing Chain Tensioner (2).
  6. Remove Timing Chain Tensioner Gasket (3) and DISCARD
    7. Fig 3: Timing Chain Tensioner Pivot Arm Bolt
    GM2742539Courtesy of GENERAL MOTORS COMPANY
  7. Remove the timing chain tensioner pivot arm bolt (1).
  8. Remove the timing chain tensioner pivot arm (2).
    9. Fig 4: Timing Chain Guide Bolts
    GM2742540Courtesy of GENERAL MOTORS COMPANY
  9. Remove the timing chain guide bolts (1).
  10. Remove the timing chain guide (2).
    11. Fig 5: Timing Chain
    GM2742543Courtesy of GENERAL MOTORS COMPANY
  11. Remove the timing chain (1).
    12. Fig 6: Timing Chain Oil Nozzle
    GM2742549Courtesy of GENERAL MOTORS COMPANY
  12. Remove the timing chain oil nozzle (1).
  13. For camshaft timing chain, sprocket, and tensioner cleaning and inspection. Refer to Camshaft Timing Chain, Sprocket, and Tensioner Cleaning and Inspection .
scientia non olet · About LEMON Manuals