LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 2.0L (LTG)) >> Repair Instructions - Off Vehicle >> Lower Crankcase Removal

Lower Crankcase Removal

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Oil Pump Flow Control Valve And Bolts
    GM2726791Courtesy of GENERAL MOTORS COMPANY
  1. Remove the oil pump flow control valve (2) and bolts (1, 3).
    2. Fig 2: Oil Gallery Plugs
    GM2726792Courtesy of GENERAL MOTORS COMPANY
  2. Remove the oil gallery plugs (1, 2).
    3. Fig 3: Lower Crankcase Perimeter Bolts
    GM2726800Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Separate, mark, and organize all reusable lower crankcase bolts to ensure installation in the correct locations.

  3. Remove the lower crankcase bolts (2, 3) from the perimeter of the lower crankcase.
  4. Remove and discard the inner lower crankcase bolts (1).
  5. Gently separate the lower crankcase (4) from the block.
scientia non olet · About LEMON Manuals