LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 2.0L (LTG)) >> Repair Instructions - Off Vehicle >> Balancer Shaft With Oil Pump Installation

Balancer Shaft With Oil Pump Installation

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Balancer And Oil Pump Shaft Assembly Bolts
    GM2742574Courtesy of GENERAL MOTORS COMPANY
  1. Install the balancer and oil pump shaft assembly (2).
  2. Install the balancer and oil pump shaft assembly bolts (1) finger tight.
    3. Fig 2: Bolts Twice In Sequence
    GM2743543Courtesy of GENERAL MOTORS COMPANY
  3. tighten the bolts twice in sequence:
    1. tighten the bolts a first pass in sequence to 58 N.m (43 lb ft).
    2. tighten the bolts a final pass in sequence to 58 N.m (43 lb ft).
scientia non olet · About LEMON Manuals