Control Valve Body Cover Installation
WARNING: This page is about a different variant/trim than selected.
| Callout | Component Name |
|---|---|
| 1 | Body Side Wiring Harness Opening Seal
NOTE:
Install a NEW seal. |
| 2 | Control Valve Body Cover Gasket |
| 3 | Control Valve Body Cover |
| 4 | Control Valve Body Cover Bolt (Qty: 6)
CAUTION:
Refer to Fastener Caution . Tighten in sequence 9 N.m (80 lb in) |
| 5 | Control Valve Body Cover Stud (Qty: 6) Tighten in sequence 9 N.m (80 lb in) |