LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 24 (Automatic Transmission - 9T45 (M3U) Or 9T50 (M3D M3H) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Control Valve Body Assembly Removal (Without ETRS) >> Control Valve Body Removal

Control Valve Body Removal

WARNING: This page is about a different variant/trim than selected.
Fig 1: Control Valve Body
GM4375399Courtesy of GENERAL MOTORS COMPANY
Control Valve Body Removal

Callout Component Name
1 Manual Shift Detent Lever Spring
NOTE:

The bolt is captured with spring.

2 Control Valve Body Bolt (Qty: 4)
3 Control Valve Body Bolt
4 Control Valve Body
5 Fluid Transfer Pipe
NOTE:

The bolt is captured with pipe.

6 Fluid Transfer Pipe Seal
NOTE:

Remove and DISCARD the seal.

7 1-2-3-4 Low and Reverse Clutch Fluid Passage Seal (Qty: 5)
NOTE:

Remove and DISCARD the seal.

8 Control Valve Body Ball Check Valve (Qty: 5)
NOTE:

On-Vehicle these may fall out.