Control Valve Body Assemble
WARNING: This page is about a different variant/trim than selected.
Control Valve Body Assemble
| Callout | Component Name |
|---|---|
| 1 | Control Valve Body Ball Check Valve (Qty: 3) |
| 2 | Park Selector Valve Spring |
| 3 | Park Selector Valve Bore Plug |
| 4 | Variable Feed Solenoid Clutch Accumulator Piston (Qty: 2) |
| 5 | Variable Feed Solenoid Clutch Accumulator Piston Spring (Qty: 2) |
| 6 | Control Valve Body Spacer Plate
NOTE:
Inspect the channel plate bolt pass through holes for damage or brinelling. Any damage will cause incorrect pressure switch operation. Replace as necessary. |
| 7 | Control Valve Body Locating Pin (Qty: 2) |
| 8 | Oil Transfer Plate |
| 9 | Control Valve Solenoid Body Bolt (Qty: 9)
CAUTION:
Refer to Fastener Caution . Tighten 9 N.m (80 lb in) |