Auxiliary Fluid Accumulator Installation
WARNING: This page is about a different variant/trim than selected.
| Callout | Component Name |
|---|---|
| 1 | Accumulator Bypass Valve Seal
NOTE:
Install a NEW seal. |
| 2 | Shift On/Off Solenoid Valve
NOTE:
Repair or replace as necessary. |
| 3 | Accumulator Valve Body Bolt (Qty: 2)
CAUTION:
Refer to Fastener Caution . Tighten 2.7 N.m (24 lb in) |
| 4 | Automatic Transmission Case Seal (Qty: 2)
NOTE:
Install a NEW seal. |
| 5 | Accumulator Bypass Valve Seal
NOTE:
Install a NEW seal. |
| 6 | Automatic Transmission Auxiliary Fluid Accumulator |
| 7 | Automatic Transmission Auxiliary Fluid Accumulator Bolt (Qty: 3) Tighten 8 N.m (71 lb in) |