LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 1.6L (LH7) Diesel) >> Repair Instructions - On Vehicle >> Intake Manifold Brace Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Engine Wiring Harness, Bracket, Bolt, Retainer And Electrical Connector
    GM4376992Courtesy of GENERAL MOTORS COMPANY
  1. Unclip Wiring Harness Retainer (1)
  2. Disconnect Electrical Connector (4)
  3. Remove Engine Wiring Harness Bracket Bolt (3)
  4. Position aside Engine Wiring Harness (2)
    5. Fig 2: Intake Manifold Brace And Bolts
    GM4376993Courtesy of GENERAL MOTORS COMPANY
  5. Remove Intake Manifold Brace Bolts (1, 2) (Qty: 4)
  6. Remove Intake Manifold Brace (3)
scientia non olet · About LEMON Manuals