LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 1.6L (LH7) Diesel) >> Repair Instructions - On Vehicle >> Generator And Air Conditioning Compressor Belt Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove Front Wheelhouse Liner Right Side. Refer to Front Wheelhouse Liner Replacement - Right Side (Equinox)Front Wheelhouse Liner Replacement - Right Side (Terrain)
    2. Fig 1: Drive Belt Tensioner, Wrench And Fixing Pin
    GM4197204Courtesy of GENERAL MOTORS COMPANY
  2. Tension the drive belt tensioner (1)
    1. Install a wrench (3) to the drive belt tensioner.
    2. Push the drive belt tensioner in arrow direction until a suitable fixing pin (2) can be installed to the bore.
    3. Fig 2: Generator And Air Conditioning Compressor Belt
    GM4199150Courtesy of GENERAL MOTORS COMPANY
  3. Remove Generator and Air Conditioning Compressor Belt (1)
scientia non olet · About LEMON Manuals