LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 1.6L (LH7) Diesel) >> Repair Instructions - On Vehicle >> Generator And Air Conditioning Compressor Belt Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Generator And Air Conditioning Compressor Belt Routing
    GM4199150Courtesy of GENERAL MOTORS COMPANY
  1. Install Generator and Air Conditioning Compressor Belt (1)
    2. Fig 2: Drive Belt Tensioner, Wrench And Fixing Pin
    GM4197204Courtesy of GENERAL MOTORS COMPANY
  2. Tension the drive belt tensioner (1).
    1. Install a wrench (3) to the drive belt tensioner.
    2. Push the drive belt tensioner in arrow direction until the suitable fixing pin (2) can be removed from the bore.
    3. Release the drive belt tensioner.
  3. Install Front Wheelhouse Liner Right Side. Refer to Front Wheelhouse Liner Replacement - Right Side (Equinox)Front Wheelhouse Liner Replacement - Right Side (Terrain)
scientia non olet · About LEMON Manuals