LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 1.6L (LH7) Diesel) >> Repair Instructions - On Vehicle >> Engine Oil Level Indicator Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Drain the engine oil. Refer to Engine Oil and Oil Filter Replacement 
    2. Fig 1: Engine Oil Level Indicator Switch, Bolts, O-Ring Seal And Electrical Connector
    GM4199144Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect the electrical connector. (1)
  3. Remove Engine Oil Level Indicator Switch Bolt (4) (Qty: 3)
  4. Remove Engine Oil Level Indicator Switch (3)
  5. Remove and DISCARD Engine Oil Level Indicator Switch O-Ring Seal (2)
scientia non olet · About LEMON Manuals